3com S7906E 설치 설명서

 

1-40 

Configuration procedure 

# Create a DLSw test group and configure related test parameters. 

<DeviceA> system-view 

[DeviceA] nqa entry admin test

 

[DeviceA-nqa-admin-test] type dlsw 

[DeviceA-nqa-admin-test-dlsw] destination ip 10.2.2.2 

# Enable the saving of history records. 

[DeviceA-nqa-admin-test-dlsw] history-record enable 

[DeviceA-nqa-admin-test-dlsw] quit

 

# Enable DLSw test. 

[DeviceA] nqa schedule admin test start-time now lifetime forever 

# Disable DLSw test after the test begins for a period of time. 

[DeviceA] undo nqa schedule admin test 

# Display the result of the last DLSw test. 

[DeviceA] display nqa result admin test

 

  NQA entry(admin admin, tag test) test results: 

    Destination IP address: 10.2.2.2

 

      Send operation times: 1              Receive response times: 1 

      Min/Max/Average round trip time: 19/19/19 

      Square-Sum of round trip time: 361 

      Last succeeded probe time: 2007-11-22 10:40:27.7 

    Extended results: 

      Packet lost in test: 0% 

      Failures due to timeout: 0 

      Failures due to disconnect: 0 

      Failures due to no connection: 0 

      Failures due to sequence error: 0 

      Failures due to internal error: 0 

      Failures due to other errors: 0 

      Packet(s) arrived late: 0 

# Display the history of DLSw tests. 

[DeviceA] display nqa history admin test 

  NQA entry(admin admin, tag test) history record(s): 

    Index      Response     Status           Time 

    1          19           Succeeded        2007-11-22 10:40:27.7 

As shown in 

, configure a static route to Switch C on Switch A, with Switch B as the next hop.  

Associate the static route, track entry, and NQA test group to verify static route configuration in real time.