3com S7906E 설치 설명서

 

1-4 

Enter system view 

— 

Enter BGP view 

bgp as-number 

— 

Enter IPv6 address family view 

ipv6-family 

— 

Configure a preferred value for 
routes received from an IPv6 
peer/peer group 

peer { ipv6-group-name | 
ipv6-address } preferred-value 
value 

Optional 

By default, the preferred value 
is 0. 

 

If you both reference a routing policy and use the command peer { ipv6-group-name | ipv6-address } 

preferred-value value to set a preferred value for routes from a peer/peer group, the routing policy sets 

a non-zero preferred value for routes matching it. Other routes not matching the routing policy uses the 

value set with the command. If the preferred value in the routing policy is zero, the routes matching it will 

also use the value set with the command. For information about using a routing policy to set a preferred 

value, refer to the command peer  { group-name | ipv4-address | ipv6-address }  route-policy 

route-policy-name { import | export } in this document, and the command apply preferred-value 

preferred-value in Routing Policy Commands of the IP Routing Volume. 

 

Follow these steps to specify the source interface for establishing TCP connections to a BGP peer or 

peer group: 

Enter system view 

— 

Enter BGP view 

bgp as-number 

— 

Enter IPv6 address family view 

— 

Specify the source interface for 
establishing TCP connections 
to an IPv6 BGP peer or peer 
group 

peer { ipv6-group-name | 
ipv6-address } 
connect-interface 
interface-type interface-number

Required 

By default, IPv6 BGP uses the 
outbound interface of the best 
route to the IPv6 BGP peer or 
peer group as the source 
interface for establishing a TCP 
connection.