3com S7906E 참조 가이드
1-14
source-address: Displays the information of the unicast route to a particular multicast source. If you do
not provide this argument, this command will display the information about all unicast routes used by
PIM.
Description
Use the display pim claimed-route command to view the information of unicast routes used by PIM.
Note that:
z
If neither all-instance nor vpn-instance is specified, this command will display the information on
the public instance.
z
If an (S, G) is marked SPT, this (S, G) entry uses a unicast route.
Examples
# View the information of all unicast routes used by PIM in the public instance.
<Sysname> display pim claimed-route
VPN-Instance: public net
RPF information about: 172.168.0.0
RPF interface: Vlan-interface1, RPF neighbor: 172.168.0.2
Referenced route/mask: 172.168.0.0/24
Referenced route type: unicast (direct)
RPF-route selecting rule: preference-preferred
The (S,G) or (*,G) list dependent on this route entry
(172.168.0.12, 227.0.0.1)
Table 1-2 display pim claimed-route command output description
Field
Description
VPN-Instance: public net
Public instance
RPF information about: 172.168.0.0
Information of the route to the multicast source
172.168.0.0
172.168.0.0
RPF interface
RPF interface type and number
RPF neighbor
IP address of the RPF neighbor
Referenced route/mask
Address/mask of the referenced route
Referenced route type
Type of the referenced route:
z
igp: IGP unicast route
z
egp: EGP unicast route
z
unicast (direct): Direct unicast route
z
unicast: Other unicast route (such as static
unicast route)
unicast route)
z
mbgp: MBGP route
z
multicast static: Static multicast route
RPF-route selecting rule
Rule of RPF route selection
The (S,G) or (*,G) list dependent on this route
entry
entry
(S,G) or (*, G) entry list dependent on this RPF
route
route