3com S7906E Guide De Référence

 

1-14 

source-address: Displays the information of the unicast route to a particular multicast source. If you do 

not provide this argument, this command will display the information about all unicast routes used by 

PIM.  

Use the display pim claimed-route command to view the information of unicast routes used by PIM. 

Note that: 

z 

If neither all-instance nor vpn-instance is specified, this command will display the information on 

the public instance. 

z 

If an (S, G) is marked SPT, this (S, G) entry uses a unicast route. 

# View the information of all unicast routes used by PIM in the public instance.  

<Sysname> display pim claimed-route 

 VPN-Instance: public net 

 RPF information about: 172.168.0.0 

     RPF interface: Vlan-interface1, RPF neighbor: 172.168.0.2 

     Referenced route/mask: 172.168.0.0/24 

     Referenced route type: unicast (direct) 

     RPF-route selecting rule: preference-preferred 

     The (S,G) or (*,G) list dependent on this route entry 

     (172.168.0.12, 227.0.0.1) 

Table 1-2 display pim claimed-route command output description  

VPN-Instance: public net 

Public instance 

RPF information about: 172.168.0.0 

Information of the route to the multicast source 
172.168.0.0 

RPF interface 

RPF interface type and number  

RPF neighbor 

IP address of the RPF neighbor 

Referenced route/mask 

Address/mask of the referenced route  

Referenced route type 

Type of the referenced route: 

z 

igp: IGP unicast route 

z 

egp: EGP unicast route 

z 

unicast (direct): Direct unicast route  

z 

unicast: Other unicast route (such as static 
unicast route) 

z 

mbgp: MBGP route 

z 

multicast static: Static multicast route 

RPF-route selecting rule 

Rule of RPF route selection  

The (S,G) or (*,G) list dependent on this route 
entry 

(S,G) or (*, G) entry list dependent on this RPF 
route