3com S7906E 참조 가이드

 

1-40 

2: System level 

None 

Use the pim require-genid command to enable rejection of hello messages without Generation_ID.  

Use the undo pim require-genid command to restore the default configuration.  

By default, hello messages without Generation_ID are accepted.  

# Enable VLAN-interface 100 to reject hello messages without Generation_ID.  

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] pim require-genid 

Interface view 

2: System level 

None 

Use the pim sm command to enable PIM-SM.  

Use the undo pim sm command to disable PIM-SM.  

By default, PIM-SM is disabled.  

Note that this command can take effect only after IP multicast routing is enabled in the corresponding 

instance. 

Related commands: pim dm;  multicast routing-table in the Multicast Routing and Forwarding 

Commands in the IP Multicast Volume.   

# Enable IP multicast routing, and enable PIM-SM on VLAN-interface 100.  

<Sysname> system-view 

[Sysname] multicast routing-enable