3com S7906E 참조 가이드

 

1-42 

Use the pim timer graft-retry command to configure the graft retry period.  

Use the undo pim timer graft-retry command to restore the system default.  

By default, the graft retry period is 3 seconds.  

# Set the graft retry period to 80 seconds on VLAN-interface 100. 

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] pim timer graft-retry 80 

pim timer hello interval 

undo pim timer hello 

Interface view 

2: System level 

interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.  

Use the pim timer hello command to configure on the current interface the interval at which hello 

messages are sent.  

Use the undo pim timer hello command to restore the system default.  

By default, hello messages are sent at the interval of 30 seconds.  

Related commands: timer hello.  

# Set the hello interval to 40 seconds on VLAN-interface 100.  

<Sysname> system-view 

[Sysname] interface vlan-interface 100 

[Sysname-Vlan-interface100] pim timer hello 40 

pim timer join-prune interval