3com S7906E 참조 가이드
1-11
Default Level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
Description
Use the msdp command to enable MSDP in the public instance or the specified VPN instance and
enter public instance or VPN instance MSDP view.
Use the undo msdp command to disable MSDP in the public instance or the specified VPN instance
and remove the configurations performed in public instance or VPN instance MSDP view to free the
resources occupied by MSDP.
By default, MSDP is disabled.
Note that:
z
If you do not specify vpn-instance, this configuration will take effect only on the public instance
z
IP multicast must be enabled in the corresponding instance before this command can take effect.
Related commands: multicast routing-enable in Multicast Routing and Forwarding Commands of the
Multicast Volume.
Examples
# Enable IP multicast routing in the public instance, and enable MSDP in the public instance to enter
public instance MSDP view.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] msdp
[Sysname-msdp]
# Enable IP multicast routing in VPN instance mvpn, and enable MSDP in VPN instance mvpn to enter
MSDP view of VPN instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn]route-distinguisher 100:1
[Sysname-vpn-instance-mvpn] multicast routing-enable
[Sysname-vpn-instance-mvpn] quit
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn]
originating-rp
Syntax
originating-rp interface-type interface-number
undo originating-rp
View
Public instance MSDP view, VPN instance MSDP view