3com S7906E 참조 가이드
1-8
the interface; if B has been configured on the interface before A is configured, the previously
configured B will be removed.
Related commands: display multicast ipv6 boundary.
Examples
# Configure VLAN-interface 100 to be the forwarding boundary of the IPv6 multicast group
FF03::101/16.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] multicast ipv6 boundary ff03::101 16
multicast ipv6 forwarding-table downstream-limit
Syntax
multicast ipv6 forwarding-table downstream-limit limit
undo multicast ipv6 forwarding-table downstream-limit
View
System view
Default Level
2: System level
Parameters
limit: Maximum number of downstream nodes (namely the maximum number of outgoing interfaces) for
a single entry in the IPv6 multicast forwarding table. The value ranges 0 to 128.
Description
Use the multicast ipv6 forwarding-table downstream-limit command to configure the maximum
number of downstream nodes for a single entry in the IPv6 multicast forwarding table.
Use the undo multicast ipv6 forwarding-table downstream-limit command to restore the system
default.
By default, the maximum number of downstream nodes for a single entry in the IPv6 multicast
forwarding table is the maximum number allowed by the system, namely 128.
Examples
# Set the maximum number of downstream nodes for a single entry in the IPv6 multicast forwarding
table to 120.
<Sysname> system-view
[Sysname] multicast ipv6 forwarding-table downstream-limit 120
multicast ipv6 forwarding-table route-limit
Syntax
multicast ipv6 forwarding-table route-limit limit
undo multicast ipv6 forwarding-table route-limit