3com S7906E 참조 가이드

 

1-43 

Use the preference command to configure preferences for IPv6 multicast eBGP, IPv6 multicast iBGP, 

and local IPv6 MBGP routes.  

Use the undo preference command to restore the default. 

The default preference values of external, internal and local IPv6 MBGP routes are 255, 255, and 130, 

respectively. 

The greater the preference value is, the lower the preference is. 

# Configure preferences for IPv6 multicast eBGP, IPv6 multicast iBGP, and local IPv6 MBGP routes as 

20, 20, and 200. 

<Sysname> system-view 

[Sysname]bgp 100 

[Sysname-bgp] ipv6-family multicast 

[Sysname-bgp-af-ipv6-mul] preference 20 20 200 

reflect between-clients 

undo reflect between-clients 

IPv6 MBGP address family view 

2: System level 

None 

Use the reflect between-clients command to enable route reflection between clients.  

Use the undo reflect between-clients command to disable this function. 

By default, route reflection between clients is enabled. 

After a route reflector is configured, it reflects the routes of a client to the other clients. If the clients of a 

route reflector are fully meshed, you need to disable route reflection between clients to reduce routing 

costs. 

Related commands: reflector cluster-id and peer reflect-client. 

# Enable route reflection between clients 

<Sysname> system-view 

[Sysname]bgp 100 

[Sysname-bgp] ipv6-family multicast