3com S7906E 참조 가이드

 

1-44 

[Sysname-bgp-af-ipv6-mul] reflect between-clients 

reflector cluster-id cluster-id 

undo reflector cluster-id 

IPv6 MBGP address family view 

2: System level 

cluster-id: Cluster ID of the route reflector, an integer from 1 to 4294967295 (the system translates it into 

an IPv4 address) or an IPv4 address. 

Use the reflector cluster-id command to configure the cluster ID of the route reflector.  

Use the undo reflector cluster-id command to remove the configured cluster ID. 

By default, each route reflector uses its router ID as the cluster ID. 

The router ID of the route reflector is the ID of the cluster. You can configure multiple route reflectors to 

improve network stability. If a cluster has multiple route reflectors, you need to use the reflector 

cluster-id command to specify the same cluster ID for these route reflectors to avoid routing loops. 

Related commands: reflect between-clients, peer reflect-client. 

# Set 50 as the cluster ID for the route reflector, which is one of multiple route reflectors in the cluster. 

<Sysname> system-view 

[Sysname]bgp 100 

[Sysname-bgp] ipv6-family multicast 

[Sysname-bgp-af-ipv6-mul] reflector cluster-id 50 

refresh  bgp  ipv6 multicast  {  ipv6-address | all | external | group ipv6-group-name | internal } 

{ export | import } 

User view 

1: Monitor level