3com S7906E 참조 가이드

 

1-18 

VLAN view 

2: System level 

None 

Use the mld-snooping querier command to enable the MLD Snooping querier function.  

Use the undo mld-snooping querier command to disable the MLD Snooping querier function.  

By default, the MLD Snooping querier function is disabled.  

Note that: 

z 

This command takes effect only if MLD Snooping is enabled in the VLAN.  

z 

This command does not take effect in a sub-VLAN of an IPv6 multicast VLAN. 

Related commands: subvlan command in IPv6 Multicast VLAN Commands in the IP Multicast Volume.  

# Enable the MLD Snooping querier function in VLAN 2.  

<Sysname> system-view 

[Sysname] vlan 2 

[Sysname-vlan2] mld-snooping querier 

mld-snooping query-interval interval 

undo mld-snooping query-interval  

VLAN view 

2: System level 

interval: MLD query interval in seconds, namely the length of time the device waits between sending 

MLD general queries. The effective range is 2 to 300.