3com S7906E 참조 가이드

 

1-20 

undo mld-snooping source-deny 

Ethernet interface view, port group view 

2: System level 

None 

Use the mld-snooping source-deny command to enable IPv6 multicast source port filtering.  

Use the undo mld-snooping source-deny command to disable IPv6 multicast source port filtering.  

By default, IPv6 multicast source port filtering is disabled.  

This command works on both MLD Snooping–enabled VLANs and VLANs with MLD enabled on their 

VLAN interfaces.  

# Enable source port filtering for IPv6 multicast data on Ethernet 2/0/1.  

<Sysname> system-view 

[Sysname] interface ethernet 2/0/1 

[Sysname-Ethernet2/0/1] mld-snooping source-deny 

mld-snooping special-query source-ip { current-interface | ipv6-address } 

VLAN view 

2: System level 

current-interface: Specifies the source IPv6 link-local address of the VLAN interface of the current 

VLAN as the source IPv6 address of MLD multicast-address-specific queries. If the current VLAN 

interface does not have an IPv6 address, the default IPv6 address FE80::02FF:FFFF:FE00:0001 will be 

used as the source IPv6 address of MLD multicast-address-specific queries.