3com S7906E 참조 가이드
1-49
View
BGP-VPNv4 subaddress family view, BGP-L2VPN address family view
Default Level
2: System level
Parameters
None
Description
Use the policy vpn-target command to enable VPN target filtering for received VPNv4 routes.
Use the undo policy vpn-target command to disable the filtering, permitting all VPNv4 routes.
Only VPNv4 routes with export route target attributes matching the local import route target attributes
are added into the routing table.
By default, the VPN target filtering function is enabled for received VPNv4 routes.
The command applies to inter-provider VPN option B schemes.
Examples
# In BGP-VPNv4 subaddress family view, enable VPN target filtering for received VPNv4 routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] policy vpn-target
# In BGP-L2VPN address family view, enable VPN target filtering for received VPNv4 routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] l2vpn-family
[Sysname-bgp-af-l2vpn] policy vpn-target
reflect between-clients
Syntax
reflect between-clients
undo reflect between-clients
View
BGP-VPNv4 subaddress family view, BGP-L2VPN address family view