3com S7906E 참조 가이드

 

1-23 

Transmit Delay 

Transmit delay of sending LSAs 

State Interface 

state 

Timer intervals configured, Hello: 10, Dead: 40, 
Wait: 40, Retransmit: 5 

Timer intervals in seconds, Hello: 10, Dead: 40, 
Wait: 40, Retransmit: 5 

Hello due in 00:00:02 

Send hello packets in 2 seconds.  

Adjacency state 

Adjacency state 

 

filter-policy { acl6-number | ipv6-prefix  ipv6-prefix-name  }  export  [  isisv6  process-id  |  ospfv3 

process-id | ripng process-id | bgp4+ | direct | static ] 

undo filter-policy export [ isisv6 process-id | ospfv3 process-id | ripng process-id | bgp4+ | direct | 

static ] 

OSPFv3 view 

2: System level 

acl6-number: Specifies the ACL6 number, ranging from 2000 to 3999.  

ipv6-prefix ipv6-prefix-name: Specifies the name of an IPv6 prefix list, a string of up to 19 characters.  

isisv6 process-id: Specifies to filter the routes of an IPv6-IS-IS process, which is in the range of 1 to 

65535. 

ospfv3  process-id: Specifies to filter the routes of an OSPFv3 process, which is in the range of 1 to 

65535. 

ripng process-id: Specifies to filter the routes of a RIPng process, which in the range of 1 to 65535. 

bgp4+: Specifies to filter BGP4+ routes.  

direct: Specifies to filter direct routes.  

static: Specifies to filter static routes.  

Use the filter-policy export command to filter redistributed routes. 

Use the undo filter-policy export command to remove the configuration. 

If no protocol is specified, all redistributed routes will be filtered. 

By default, IPv6 OSPFv3 does not filter redistributed routes.