3com S7906E 빠른 설정 가이드
1-41
Table 1-71 Specifications of the 10/100Base-TX management Ethernet port
Item
Specifications
Connector type
RJ-45
Number of connectors
1
Interface speed
10/100 Mbps, half/full duplex
Cable medium and maximum transmission
distance
distance
Category-5 twisted pair, with a maximum
transmission distance of 100 m (328.08 ft.)
transmission distance of 100 m (328.08 ft.)
Function
Used for switch software upgrade and network
management
management
describes the status LEDs of the 10/100Base-TX management Ethernet port.
Table 1-72 Description of the status LEDs of the 10/100Base-TX management Ethernet port
LED
Description
LINK
z
OFF: No link is present.
z
ON: A link is present.
ACT
z
OFF: No data is being transmitted or received.
z
Blinking: Data is being transmitted or received.
System LEDs
z
System status LEDs
The LEDs on the card panel indicate the statuses of the power modules, fans, LPUs seated in the
twelve slots, and LSQ1SR12GB0 itself.
z
Power status LEDs
PWR: The power status LEDs show the status of the power modules.
Table 1-73 Description of the power status LEDs
LED
Description
ON: The power modules operate normally.
OK
OFF: The power module is faulty or out of position.
ON: The power module is faulty or out of position.
FAIL
OFF: The power modules are operational or out of position.
z
Fan status LEDs
FAN: The fan status LEDs show the status of the fan tray.
Table 1-74 Description of the fan status LEDs
LED
Description
OK
z
ON: The fans operate normally.
z
OFF: The fans are faulty or out of position.