3com MSR 20-20 참조 매뉴얼

C

HAPTER

 74: IS-IS C

ONFIGURATION

 C

OMMANDS

rip process-id: Filters outgoing routes redistributed from a RIP process. The process 
ID is in the range of 1 to 65535.

bgp: Filters outgoing routes redistributed from BGP.

direct: Filters outgoing redistributed direct routes.

static: Filters outgoing redistributed static routes.

If no parameter is specified, the system will filter all outgoing redistributed routing 
information.

Use the filter-policy export command to configure IS-IS to filter outgoing 
redistributed routes.

Use the undo filter-policy export command to disable IS-IS from filtering 
outgoing redistributed routes.

IS-IS does not filter outgoing redistributed routes by default.

In some cases, only redistributed routing information satisfying certain conditions 
can be advertised. You can use the filter-policy command to reference filtering 
conditions.

filter-policy import (IS-IS view).

# Reference ACL 2000 to filter outgoing redistributed routes.

<Sysname> system-view

[Sysname] isis

[Sysname-isis-1] filter-policy 2000 export 

filter-policy { acl-number | ip-prefix ip-prefix-name | route-policy 
route-policy-name } import

IS-IS view

acl-number: Specifies the number of an ACL that is used to filter incoming routes, 
ranging from 2000 to 3999.

ip-prefix ip-prefix-name: Specifies the name of an IP prefix list that is used to filter 
incoming routes, a string of 1 to 19 characters.

route-policy route-policy-name: Specifies the name of a routing policy that is 
used to filter incoming routes, a string of 1 to 19 characters.