3com MSR 20-20 참조 매뉴얼

■

Send RIP-1 broadcast messages

■

Receive RIP-1 broadcast messages

■

Receive RIP-1 unicast messages

When RIP-2 runs on the interface in broadcast mode, the interface will:

■

Send RIP-2 broadcast messages

■

Receive RIP-1 broadcast messages

■

Receive RIP-1 unicast messages

■

Receive RIP-2 broadcast messages

■

Receive RIP-2 multicast messages

■

Receive RIP-2 unicast messages

When RIP-2 runs on the interface in multicast mode, the interface will:

■

Send RIP-2 multicast messages

■

Receive RIP-2 broadcast messages

■

Receive RIP-2 multicast messages

■

Receive RIP-2 unicast messages

# Configure Ethernet1/0 to broadcast RIP-2 messages.

<Sysname> system-view

[Sysname] interface ethernet1/0

[Sysname-Ethernet1/0] rip version 2 broadcast 

silent-interface { all | interface-type interface-number }

undo silent-interface { all | interface-type interface-number }

RIP view

all: Silents all interfaces.

interface-type interface-number: Specifies an interface.

Use the silent-interface command to disable an interface or all interfaces from 
sending routing updates. That is, the interface only receives but does not send RIP 
messages.

Use the undo silent-interface command to restore the default.

By default, all interfaces are allowed to send routing updates.

# Configure all interfaces to work in the silent mode, and then activate 
Ethernet1/0.