3com MSR 20-20 참조 매뉴얼

med-value: Applies the MED value to redistributed routes. The value is in the range 
0 to 4294967295. If not specified, the cost of the redistributed route is used as its 
MED in the IPv6 BGP routing domain.

route-policy-name: Name of a routing policy used to filter redistributed routes, a 
string of 1 to 19 characters.

Use the import-route command to redistribute routes from another routing 
protocol.

Use the undo import-route command to remove the configuration.

By default, IPv6 BGP does not redistribute routes from any routing protocol.

The routes redistributed using the import-route command has the incomplete 
origin attribute.

# Redistribute routes from RIPng 1.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] import-route ripng 1 

BGP view

None

Use the ipv6-family command to enter IPv6 address family view.

Use the undo ipv6-family command to remove all configurations from the view.

IPv4 BGP unicast view is the default.

# Enter IPv6 address family view.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family 

network ipv6-address prefix-length [ short-cut | route-policy route-policy-name ]

undo network ipv6-address prefix-length [ short-cut ]