3com MSR 20-20 참조 매뉴얼

C

HAPTER

 82: IP

V

6 BGP C

ONFIGURATION

 C

OMMANDS

IPv6 address family view

ipv6-address: IPv6 address.

prefix-length: Prefix length of the address, in the range 0 to 128.

short-cut: If the keyword is specified for an EBGP route, the route will use the 
local routing management value rather than that of EBGP routes, so the 
preference of the route is reduced.

route-policy-name: Name of a routing policy, a string of 1 to 19 characters.

Use the network command to advertise a network to the IPv6 BGP routing table.

Use the undo network command to remove an entry from the IPv6 BGP routing 
table.

By default, no route is advertised.

Note that:

■

The route to be advertised must exist in the local IP routing table, and using a 
routing policy makes route management more flexible.

■

The route advertised to the BGP routing table using the network command 
has the IGP origin attribute.

# Advertise the network 2002::/16 into the IPv6 BGP routing table.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] network 2002:: 16 

peer { group-name | ipv4-address | ipv6-address } advertise-community

undo peer { group-name | ipv4-address | ipv6-address } advertise-community

IPv6 address family view

group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.

ipv4-address: IPv4 address of a peer.

ipv6-address: IPv6 address of a peer.

Use the peer advertise-community command to advertise the community 
attribute to a peer/peer group.