3com MSR 20-20 참조 매뉴얼

undo peer { ipv6-group-name | ipv6-address } route-update-interval

IPv6 address family view

ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.

ipv6-address: IPv6 address of a peer.

seconds: Specifies the minimum interval for sending the same update to a peer 
(group) from 5 to 600 seconds.

Use the peer route-update-interval command to specify the interval for 
sending the same update to a peer/peer group.

Use the undo peer route-update-interval command to restore the default.

By default, the interval is 15 seconds for the IBGP peer, and 30 seconds for the 
EBGP peer.

# Specify the interval for sending the same update to the peer 1:2::3:4 as 10 
seconds.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100

[Sysname-bgp-af-ipv6] peer 1:2::3:4 route-update-interval 10 

peer { ipv6-group-name | ipv6-address } substitute-as

undo peer { ipv6-group-name | ipv6-address } substitute-as

IPv6 address family view

ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.

ipv6-address: IPv6 address of a peer.

Use the peer substitute-as command to substitute the local AS number for the 
AS number of a peer/peer group in the AS_PATH attribute.

Use the undo peer substitute-as command to remove the configuration.

The substitution is not configured by default.

# Substitute the local AS number for the AS number of peer 1:2::3:4.

<Sysname> system-view

[Sysname] bgp 100