3com MSR 20-20 참조 매뉴얼

OSPFv3 area view

value: Specifies a cost for the default route advertised to the stub area, in the 
range of 0 to 65535. The default is 1.

Use the default-cost command to specify the cost of the default route to be 
advertised to the stub area.

Use the undo-default-cost command to restore the default value.

Use of this command is only available on the ABR that is connected to a stub area.

You have two commands to configure a stub area: stub, defaulted-cost. You 
need to use the stub command on routers connected to a stub area to configure 
the area as stub.

If multiple OSPFv3 processes are running, use of this command takes effect only 
for the current process.

stub(OSPFv3 area view).

# Configure Area1 as a stub area, and specify the cost of the default route 
advertised to the stub area as 60.

<Sysname> system-view

[Sysname] ospfv3

[Sysname-ospfv3-1] area 1

[Sysname-ospfv3-1-area-0.0.0.1] stub

[Sysname-ospfv3-1-area-0.0.0.1] default-cost 60 

Any view

None

Use the display debugging ospfv3 command to display global OSPFv3 
debugging state information.

# Display the global OSPFv3 debugging state information.

<Sysname> display debugging ospfv3

OSPFv3 External route calculation debugging is on