3com MSR 20-20 참조 매뉴얼
1283
display ospfv3 interface
Syntax
display ospfv3 interface [ interface-type interface-number | statistic ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
statistic: Displays the interface statistics.
Description
Use the display ospfv3 interface command to display OSPFv3 interface
information.
information.
Examples
# Display OSPFv3 interface information.
<Sysname> display ospfv3 interface serial 2/0
Serial2/0 is up, line protocol is up
Interface ID 518
IPv6 Prefixes
FE80::1441:0:E213:1 (Link-Local Address)
2000:1::1
OSPFv3 Process (1), Area 0.0.0.1, Instance ID 0
Router ID 2.2.2.2, Network Type POINTOPOINT, Cost: 1562
Transmit Delay is 1 sec, State Point-To-Point, Priority 1
No designated router on this link
No backup designated router on this link
Timer interval configured, Hello: 10, Dead: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:02
Neighbor Count is 1, Adjacent neighbor count is 1
These LSAs’ checksum Sum
Sum of all LSAs’ checksum
Number of Unknown LSA
Number of unknown LSAs
Table 298 Description on the fields of the display isofv3 command
Field Description
Table 299 Description on the fields of the display ospfv3 interface command
Field Description
Interface ID
Interface ID
IPv6 Prefixes
IPv6 Prefix
OSPFv3 Process
OSPFv3 Process
Area Area
ID
Instance ID
Instance ID
Router ID
Router ID
Network Type
Network type of the interface
Cost
Cost value of the interface
Transmit Delay
Transmission delay of the interface
State Interface
state
Priority
DR priority of the interface
No designated router on this link
No designated router on this link
No backup designated router on this link
No backup designated router on this link