3com MSR 20-20 참조 매뉴얼

C

HAPTER

 91: IP

V

6 M

ULTICAST

 R

OUTING

 

AND

 F

ORWARDING

 C

ONFIGURATION

 C

OMMANDS

display multicast ipv6 forwarding-table.

# Set the maximum number of downstream nodes for a single route in the IPv6 
multicast forwarding table to 120.

<Sysname> system-view

[Sysname] multicast ipv6 forwarding-table downstream-limit 120 

multicast ipv6 forwarding-table route-limit limit

System view

limit: Maximum number of routing entries in the IPv6 multicast forwarding table. 
The value ranges 0 to 900.

Use the multicast ipv6 forwarding-table route-limit command to configure 
the maximum number of routing entries in the IPv6 multicast forwarding table.

Use the undo multicast ipv6 forwarding-table route-limit command to 
restore the maximum number of routing entries in the IPv6 multicast forwarding 
table to the system default.

By default, the maximum number of routing entries in the IPv6 multicast 
forwarding table is 900.

The allowable maximum number of routing entries varies with devices.

display multicast ipv6 forwarding-table.

# Set the maximum number of routing entries in the IPv6 multicast forwarding 
table to 200.

<Sysname> system-view

[Sysname] multicast ipv6 forwarding-table route-limit 200 

multicast ipv6 load-splitting {source | source-group }

System view

source: Specifies to implement IPv6 multicast load splitting on a per-source basis.