3com MSR 20-20 참조 매뉴얼

C

HAPTER

 93: IP

V

6 PIM C

ONFIGURATION

 C

OMMANDS

IPv6 PIM view

interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.

Use the timer hello command to configure the hello interval globally.

Use the undo timer hello command to restore the default setting.

By default, hello messages are sent at the interval of 30 seconds.

pim ipv6 timer hello.

# Set the global hello interval to 40 seconds.

<Sysname> system-view

[Sysname] pim ipv6

[Sysname-pim6] timer hello 40 

timer join-prune interval

IPv6 PIM view

interval: Join/prune interval in seconds, with an effective range of 1 to 
2,147,483,647.

Use the timer join-prune command to configure the join/prune interval globally.

Use the undo timer join-prune command to restore the default setting.

By default, the join/prune interval is 60 seconds.

pim ipv6 timer join-prune.

# Set the global join/prune interval to 80 seconds.

<Sysname> system-view

[Sysname] pim ipv6

[Sysname-pim6] timer join-prune 80 

timer spt-switch interval