3com MSR 20-20 참조 매뉴얼

C

HAPTER

 95: MPLS B

ASICS

 C

ONFIGURATION

 C

OMMANDS

vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31 
characters.

|: Filters the output information.

begin: Begins with the specified string.

include: Includes the specified string.

exclude: Excludes the specified string.

regular-expression: Regular expression, a string of 1 to 80 characters. No blank 
space is acceptable.

Use the display mpls ldp vpn-instance command to display information about 
a specified VPN instance.

mpls ldp (system view), mpls ldp (interface view).

# Display information about VPN instance vpn1.

<Sysname> display mpls ldp vpn-instance vpn1

LDP Global Information

--------------------------------------------------------------------

Protocol Version

: V1

Neighbor Liveness

: 60 Sec

Graceful Restart

: Off

FT Reconnect Timer

: 60 Sec

MTU Signaling

: On

Recovery Timer

: 60 Sec

LDP Instance Information

--------------------------------------------------------------------

Instance ID

: 1

VPN-Instance

: vpn1

Instance Status

: Active

LSR ID

: 1.1.1.9

Hop Count Limit

: 32

Path Vector Limit

: 32

Loop Detection

: Off

DU Re-advertise Timer

: 30 Sec

DU Re-advertise Flag : On

DU Explicit Request

: Off

Request Retry Flag

: On

Label Distribution Mode : Ordered

Label Retention Mode : Liberal 

n

For description on the fields of the command output, see Table 370.

display mpls lsp  [ { incoming-interface | outgoing-interface } interface-type 
interface-number ] [ in-label in-label-value ] [ out-label out-label-value ] [ { exclude | 
include } dest-addr mask-length ] [ vpn-instance vpn-instance-name ] [ asbr | 
protocol { bgp | bgp-ipv6 | crldp | ldp | rsvp-te | static | static-cr } ]  [ egress | ingress 
| transit ] [ verbose ]

Any view

incoming-interface: Incoming interface of the LSPs.

outgoing-interface: Outgoing interface of the LSPs.