3com MSR 20-20 참조 매뉴얼

C

HAPTER

 95: MPLS B

ASICS

 C

ONFIGURATION

 C

OMMANDS

System view/interface view

None

Use the mpls command in system view to enable MPLS for the current node and 
enter MPLS view.

Use the undo mpls command in system view to disable MPLS for the current 
node.

Use the mpls command in interface view to enable MPLS for the interface.

Use the undo mpls command in interface view to disable MPLS for the interface.

By default, MPLS capability is not enabled.

Note that:

■

You need to configure the LSR ID before enabling MPLS capability.

■

You need to enable MPLS globally before enabling it for an interface.

■

You need to enter MPLS view to configure other MPLS commands.

mpls lsr-id.

# Enable MPLS for the current node and enter MPLS view.

<Sysname> System-view

[Sysname] mpls lsr-id 1.1.1.1

[Sysname] mpls

[Sysname-mpls] quit 

# Enable MPLS for interface Ethernet 1/0.

<Sysname> System-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] mpls 

mpls ldp [ vpn-instance vpn-instance-name ]

undo mpls ldp [ vpn-instance vpn-instance-name ]

System view

vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31 
characters.

Use the mpls ldp command to enable LDP for the current node and enter MPLS 
LDP view.