3com MSR 20-20 참조 매뉴얼

# Set the targeted Keepalive timer for remote sessions to 1,000 seconds.

<Sysname> System-view

[Sysname] mpls ldp remote-peer BJI

[Sysname-mpls-ldp-remote-bji] remote-ip 3.3.3.3

[Sysname-mpls-ldp-remote-bji] mpls ldp timer keepalive-hold 1000 

mpls ldp transport-address { interface-type interface-number | interface }

Interface view/MPLS LDP remote peer view

interface-type interface-number: Specifies an interface by its type and number, 
making LDP use the address of this interface as the TCP transport address.

interface: Specifies that LDP use the IP address of the current interface as the TCP 
transport address. This keyword is available only in interface view.

Use the mpls ldp transport-address command to configure the LDP transport 
addresses.

Use the undo mpls ldp transport-address command to restore the defaults.

By default, the transport addresses are both the MPLS LSR ID.

In interface view, you configure the link Hello transport address; in MPLS LDP 
remote peer view, you configure the targeted Hello transport address.

# On interface Ethernet 1/0, configure the link Hello transport address for local 
sessions as the IP address of the current interface.

<Sysname> System-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] mpls

[Sysname-Ethernet1/0] mpls ldp

[Sysname-Ethernet1/0] mpls ldp transport-address interface 

# Configure the targeted Hello transport address for remote sessions to be the IP 
address of interface Ethernet 1/0.

[Sysname] mpls ldp remote-peer bji

[Sysname-mpls-ldp-remote-bji] remote-ip 3.3.3.3

[Sysname-mpls-ldp-remote-bji] mpls ldp transport-address ethernet 1/0 

mpls lsr-id lsr-id