3com MSR 20-20 참조 매뉴얼

mpls ldp remote-peer remote-peer-name

undo mpls ldp remote-peer remote-peer-name

System view

remote-peer-name: Name of the remote peer, a case-insensitive string of 1 to 32 
characters.

Use the mpls ldp remote-peer command to create a remote peer entity and 
enter MPLS LDP remote peer view.

Use the undo mpls ldp remote-peer command to remove a remote peer entity.

# Create a remote peer entity named BJI.

<Sysname> System-view

[Sysname] mpls ldp remote-peer BJI

[Sysname-mpls-ldp-remote-bji] 

mpls ldp timer hello-hold value

Interface view/MPLS LDP remote peer view

value: Length of time for the Hello timer, in the range 1 to 65,535 seconds.

Use the mpls ldp timer hello-hold command to set the Hello timers.

Use the undo mpls ldp timer hello-hold command to restore the defaults.

In interface view, you configure the link Hello timer; in MPLS LDP remote peer 
view, you configure the targeted Hello timer.

By default, the value of the link Hello timer is 15 seconds, while that of the 
targeted Hello timer is 45 seconds.

n

mpls ldp (system view), mpls ldp (interface view).