3com MSR 20-20 참조 매뉴얼
1575
display mpls rsvp-te established
Syntax
display mpls rsvp-te established [ interface interface-type interface-number ] [ |
{ begin | include | exclude } regular-expression ]
{ begin | include | exclude } regular-expression ]
View
Any view
Parameter
interface interface-type interface-number: Specifies an interface by its type and
number.
number.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
spaces.
Description
Use the display mpls rsvp-te established command to display information
about RSVP-TE globally or for an interface.
about RSVP-TE globally or for an interface.
Example
# Display RSVP-TE information for interface Ethernet 1/0.
<Sysname> display mpls rsvp-te established interface ethernet 1/0
Interface Ethernet1/0
Token Bucket Rate: 0.00
Peak Data Rate: 0.00
Tunnel Dest: 2.2.2.2
Ingress LSR ID: 3.3.3.3
Local LSP ID: 4
Session Tunnel ID: 4
Next Hop Addr: 80.4.1.1
Upstream Label: 1024
Downstream Label: 3
Table 396 Description on the fields of the display mpls rsvp-te established command
Field Description
Interface Ethernet1/0
RSVP-TE enabled Ethernet interface
Token Bucket rate
Token bucket rate, a traffic parameter
Peak Data Rate
Peak rate, a traffic parameter
Tunnel Dest
Tunnel destination, in the format of X.X.X.X
Ingress LSR ID
Ingress LSR ID, in the format of X.X.X.X
Local LSP ID
Local LSP ID
Session Tunnel ID
Session tunnel ID
Next Hop Addr
Next hop address, in the format of X.X.X.X
Upstream label
Upstream label
Downstream Label
Downstream label