3com MSR 20-20 참조 매뉴얼

display mpls rsvp-te psb-content ingress-lsr-id lspid tunnel-id egress-lsr-id [ | { begin 
| include | exclude } regular-expression ]

Any view

ingress-lsr-id: Ingress LSR ID.

lspid: Local LSR ID, in the range 1 to 65,535.

tunnel-id: Tunnel ID, in the range 0 to 65,535.

egress-lsr-id: Egress LSR ID.

|: Filters output by regular expression.

begin: Displays information beginning with a defined regular expression.

include: Displays information that includes a defined regular expression.

exclude: Displays information that excludes a defined regular expression.

regular-expression: Regular expression, a string of 1 to 80 characters without 
spaces.

Use the display mpls rsvp-te psb-content command to display information 
about RSVP-TE PSB.

# Display PSB information.

<Sysname> display mpls rsvp-te psb-content 19.19.19.19 1 0 29.29.29.29

The PSB Content:

Tunnel Dest: 29.29.29.29

Session Tunnel ID: 0

Tunnel ExtID: 19.19.19.19

Ingress LSR ID: 19.19.19.19

Local LSP ID: 1

Previous Hop : 101.101.101.1 Next Hop : -----

Incoming / Outgoing Interface: Ethernet1/0

/

-----

RSB Count 

Number of reservation state blocks 

Hello Type Sent 

Type of hellos sent to the neighbor: REQ, ACK, or NONE 

Neighbor Hello Extension 

State of hello extension: enabled or disabled. This field is 
displayed only when hello extension is enabled on the interface. 

SRefresh Enable 

State of summary refresh: YES for enabled and NO for disabled 

Reliability Enable 

State of the reliability function: YES for enabled and NO for 
disabled 

Graceful Restart State 

Neighbor’s GR status: Not ready, Ready, Restart, or Recovery. 
Displayed as --- when not supported by the device. 

Restart Time 

GR restart interval in seconds 

Recovery Time 

GR recovery interval in seconds

Table 397   Description on the fields of the display mpls rsvp-te peer command