3com MSR 20-20 참조 매뉴얼

C

HAPTER

 96: MPLS TE C

ONFIGURATION

 C

OMMANDS

ip-address: Defines a node by its link IP address or router ID in dotted decimal 
notation. In the strict routing approach, this IP address must be a link IP address. In 
the loose routing approach, this IP address can be either a link IP address or router 
ID.

include: Includes the specified IP address on the explicit path.

loose: Indicates that the next hop is a loose node which is not necessarily directly 
connected to current node.

strict: Indicates that the next hop is a strict node which must be directly 
connected to current node.

exclude: Excludes the specified IP address from the explicit path.

Use the next hop command to define a node on the explicit path. By performing 
this command multiple times, you may define all nodes that the explicit path must 
traverse in sequence.

By default, next hops are strict hops on an explicit path.

delete hop.

# Exclude IP address 10.0.0.125 from the MPLS TE explicit path p1.

[Sysname-explicit-path-p1] next hop 10.0.0.125 exclude 

OSPF view

enable: Enables the opaque LSA capability.

Use the opaque-capability command to enable the opaque LSA capability for 
the OSPF process to generate and receive from its neighbors Opaque LSAs.

Use the undo opaque-capability command to restore the default.

By default, the opaque LSA capability of OSPF is disabled.

# Enable the opaque LSA capability of OSPF.

<Sysname> system-view

[Sysname] ospf 100

[Sysname-ospf-100] opaque-capability enable