3com MSR 20-20 참조 매뉴얼

C

HAPTER

 96: MPLS TE C

ONFIGURATION

 C

OMMANDS

System view

Tunnel-name: Tunnel name comprising 1 to 15 characters.

interface-type interface-number: Specifies an interface by its type and number.

in-label-value: Incoming label, in the range 16 to 1023.

ingress-lsr-id: Ingress LSR ID, in the format of an IP address.

tunnel-id: Tunnel ID, in the range 1 to 65534.

Use the static-cr-lsp egress command to configure a static CR-LSP on the egress 
node.

Use the undo static-cr-lsp egress command to remove the static CR-LSP.

# Configure a static CR-LSP on the egress node, setting its name to tunnel24, 
incoming interface to Serial 1/0, and incoming label to 233.

<Sysname> system-view

[Sysname] static-cr-lsp egress tunnel34 incoming-interface serial 1/

0 in-label 233 

static-cr-lsp ingress tunnel-name destination dest-addr { nexthop next-hop-addr | 
outgoing-interface interface-type interface-number } out-label out-label-value 
[ bandwidth [ bc0 | bc1 ] bandwidth-value ]

undo static-cr-lsp ingress tunnel-name

System view

tunnel-name: Name of the tunnel, a case sensitive string of 1 to 15 characters. It 
must be an exact reference to a tunnel created by the interface tunnel 
command.

next-hop-addr: Next hop address.

outgoing-interface interface-type interface-number: Specifies an outgoing 
interface for the static CR-LSP.

out-label-value: Outgoing label, in the range 16 to 1023.

bc0: Obtains bandwidth from a subpool.

bc1: Obtains bandwidth from the global pool.

bandwidth-value: Bandwidth assigned to the CR-LSP, in the range 1 to 32000000 
kbps.