3com MSR 20-20 참조 매뉴얼
1690
C
HAPTER
98: MPLS L3VPN C
ONFIGURATION
C
OMMANDS
Import VPN Targets :
4:4 5:5
Import Route Policy : poly-1
Description : This is vpn1
Maximum number of Routes : 500
Interfaces :
Ethernet1/0
display ospf sham-link
Syntax
display ospf [ process-id ] sham-link [ area area-id ]
View
Any view
Parameter
process-id: OSPF process ID, in the range 1 to 65535.
area-id: OSPF area ID. It can be an integer in the range 0 to 4294967295 or in the
format of an IPv4 address.
format of an IPv4 address.
Description
Use the display ospf sham-link command to display information about sham
links.
links.
With neither process ID nor area ID specified, the command displays information
about all configured sham links.
about all configured sham links.
Related command:
Example
# Display information about all OSPF sham links.
<Sysname> display ospf sham-link
OSPF Process 100 with Router ID 100.1.1.2
Sham Link:
Area
RouterId
Source-IP
Destination-IP
State Cost
0.0.0.1
100.1.1.2
3.3.3.3
5.5.5.5
P-2-P 10
Table 458 Description on the fields of display ip vpn-instance instance-name
Field Description
VPN-Instance Name and ID
Name and ID of the VPN instance
CreateTime
Time when the VPN instance was created
Up time
Duration of the VPN instance
Route Distinguisher
RD of the VPN instance
Export VPN Targets
Export target attribute of the VPN instance
Import VPN Targets
Import target attribute of the VPN instance
Import Route Policy
Import routing policy of the VPN instance
Description
Description of the VPN instance
Maximum number of Routes
Maximum number of routes of the VPN instance
Interfaces
Interface to which the VPN instance is bound
Table 459 Description on the fields of the display ospf sham-link command
Field Description
Area
OSPF area to which the sham link belongs