3com MSR 20-20 참조 매뉴얼

C

HAPTER

 102: DVPN T

UNNEL

 C

ONFIGURATION

 C

OMMANDS

Private IP:

10.0.0.22

Public IP:

28.1.1.22

Tunnel type:

Hub-Spoke

State:

SUCCESS

Holding time: 0h 44m 9s

Input:

279 packets,

100 data packets,

179 control packets

91 multicasts,

0 errors

Output: 273 packets,

99 data packets,

174 control packets

91 multicasts,

0 errors 

dvpn session dumb-time time-interval

Tunnel interface view

time-interval: Quiet period after the DVPN tunneling fails in seconds, in the range 
10 to 600.

Use the dvpn session dumb-time command to configure the quiet period 
when the attempts for DVPN tunneling reach the maximum value. After the quiet 
period elapsed, the device initiates a new DVPN tunneling.

Use the undo dvpn session dumb-time command to restore the default.

By default, the quiet period is 120 seconds.

Note that the VAM client triggers the quiet timer only when the attempts for 
tunneling the Hub reach the maximum value.

Table 467   Description on the fields of the display dvpn session command

Interface DVPN 

tunnel 

interface 

Total number 

Total number of DVPN tunnels established on the tunnel interface 

Private IP 

Private address of the DVPN tunnel peer 

Public IP 

Public address of the DVPN tunnel peer 

Tunnel type 

Type of the DVPN tunnel 

State 

Status of the DVPN tunnel, which can be SUCCESS, ESTABLISH, or 
DUMB.

■

SUCCESS: Indicates that the tunnel is already established.

■

ESTABLISH: Indicates that the tunnel is being established.

■

DUMB: Indicates that the tunnel failed to be established and is now 
quiet. 

Holding time 

Length of time that the tunnel is in the current state 

Input 

Statistics about inbound packets, including the counts of all packets, data 
packets, control packets, multicast packets, and erroneous packets. 

Output 

Statistics about outbound packets, including the counts of all packets, 
data packets, control packets, multicast packets, and erroneous packets.