3com MSR 20-20 참조 매뉴얼

interface tunnel on page 884 and tunnel-protocol on page 887.

# Set the quiet period to 100 seconds for VAM client abc when the attempts for 
tunneling the Hub reach the maximum value.

<Sysname> system-view

[Sysname] interface tunnel 0

[Sysname-Tunnel0] dvpn session dumb-time 100 

dvpn session idle-time time-interval

Tunnel interface view

time-interval: Idle timeout for a Spoke-Spoke type DVPN tunnel in seconds, in the 
range 60 to 1,800.

Use the dvpn session idle-time command to configure the idle timeout of a 
Spoke-Spoke type DVPN tunnel, that is, the tunnel will be removed automatically 
if no data flows are transferred through a Spoke-Spoke type DVPN tunnel during 
the idle timeout time.

Use the undo dvpn session idle-time command to restore the default.

By default, the idle timeout for a Spoke-Spoke type DVPN tunnel is 300 seconds.

Note that all VAM clients in a VPN domain must have the same configuration.

interface tunnel on page 884 and tunnel-protocol on page 887.

# Set the idle timeout for a Spoke-Spoke type DVPN tunnel to 600 seconds.

<Sysname> system-view

[Sysname] interface tunnel 0

[Sysname-tunnel0] dvpn session idle-time 600 

ipsec profile ipsec-profile-name&<1-6>

undo ipsec profile [ ipsec-profile-name&<1-6> ]

Tunnel interface view

ipsec-profile-name&<1-6>: Name of the IPSec profile used for protecting data 
packets and control packets passing through a DVPN tunnel, a case-insensitive