3com MSR 20-20 참조 매뉴얼
1878
C
HAPTER
125: FR Q
O
S C
ONFIGURATION
C
OMMANDS
Related commands:
Examples
# Set the CIR ALLOW of the FR class that is named test1 as 64000 bps.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] cir allow 64000
congestion-threshold
Syntax
congestion-threshold { de | ecn } queue-percentage
undo congestion-threshold { de | ecn }
View
Frame relay class view
Parameters
de: Discards the FR packet whose DE flag bit is 1 upon congestion.
ecn: Processes the flag bits, BECN and FECN, of FR packet upon congestion.
queue-percentage: Network congestion threshold, the utility ratio of virtual circuit
queue, namely the percentage of the current queue length of virtual circuit to the
total queue length, ranging from 1 to 100. By default, it is 100.
queue, namely the percentage of the current queue length of virtual circuit to the
total queue length, ranging from 1 to 100. By default, it is 100.
Description
Use the congestion-threshold command to enable congestion management
function of FR virtual circuit.
function of FR virtual circuit.
Use the undo congestion-threshold command to disable this function.
When the percentage of current queue length to the total queue length of virtual
circuit exceeds the set congestion threshold, it will be regarded that congestion
occurs on the virtual circuit and congestion management will be performed on
packets on virtual circuit.
circuit exceeds the set congestion threshold, it will be regarded that congestion
occurs on the virtual circuit and congestion management will be performed on
packets on virtual circuit.
Related commands:
Examples
# Set to discard the FR packet whose DE flag bit is 1 concerning the FR class
named test1, when the current queue length of virtual circuit exceeds 80% of the
total length.
named test1, when the current queue length of virtual circuit exceeds 80% of the
total length.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] congestion-threshold de 80
cq
Syntax
cq cql cql-index
undo cq