3com MSR 20-20 참조 매뉴얼
1896
C
HAPTER
125: FR Q
O
S C
ONFIGURATION
C
OMMANDS
Examples
# Enable the FR traffic shaping function, by adjusting the packets with the BECN
flag 1 and the ratio of each adaptation is set to 20.
flag 1 and the ratio of each adaptation is set to 20.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] traffic-shaping adaptation becn 20
wfq
Syntax
wfq [ congestive-discard-threshold [ dynamic-queues ] ]
undo wfq
View
Frame relay class view
Parameters
congestive-discard-threshold: The maximum number of packets allowed in the
queue. Packets exceeding this limitation will be discarded. The permitted value
ranges from 1 to 1024, with a default of 64.
queue. Packets exceeding this limitation will be discarded. The permitted value
ranges from 1 to 1024, with a default of 64.
dynamic-queues: Total number of queues, the value can be one of 16, 32, 64,
128, 256, 512, 1024, 2048 and 4096, with the default of 256.
128, 256, 512, 1024, 2048 and 4096, with the default of 256.
Description
Use the wfq command to set the queue type of the VC to be WFQ.
Use the undo wfq command to restore the queue type to FIFO.
By default, the virtual circuit queuing type is FIFO.
Related commands:
Examples
# Apply WFQ to the FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] wfq 128 512