3com MSR 20-20 참조 매뉴얼

local-user password-display-mode { auto | cipher-force }

System view

auto: Displays the password of an accessing user based on the configuration of 
the user by using the password command.

cipher-force: Displays the passwords of all accessing users in cipher text.

Use the local-user password-display-mode command to set the password 
display mode for all local users.

Use the undo local-user password-display-mode command to restore the 
default.

The default mode is auto.

With the cipher-force mode configured,

■

A local user password is always displayed in cipher text, regardless of the 
configuration of the password command.

■

If you use the save command to save the configuration, all existing local user 
passwords will still be displayed in cipher text after the device restarts, even if 
you restore the display mode to auto.

display local-user, password.

# Specify to display the passwords of all accessing users in cipher text.

[Sysname] local-user password-display-mode cipher-force 

password { cipher | simple } password

Local user view

cipher: Specifies to display the password in cipher text.

simple: Specifies to display the password in simple text.

password: Password for the local user.