3com MSR 20-20 참조 매뉴얼

C

HAPTER

 128: RADIUS C

ONFIGURATION

 C

OMMANDS

accounting-on enable interval seconds

RADIUS scheme view

seconds: Time interval to retransmit accounting-on packet in seconds, ranging 
from 1 to 15.

Use the accounting-on enable interval command to configure the 
retransmission interval of accounting-on packets.

Use the undo accounting-on enable interval command to restore the 
default.

By default, the retransmission interval of accounting-on packets is 3 seconds.

Note that:

■

This command is applicable to centralized devices only.

■

Execution of this command does not affect the results of other accounting-on 
related commands such as accounting-on enable. That is, execution of the 
undo accounting-on enable interval command will not disable the 
accounting-on function.

■

The retransmission interval configured with this command takes effect 
immediately.

radius scheme, accounting-on enable

# In RADIUS scheme rd, set the retransmission interval of accounting-on packet to 
5 seconds.

<Sysname> system-view

[Sysname] radius scheme rd

[Sysname-radius-rd] accounting-on enable interval 5 

accounting-on enable send send-times

RADIUS scheme view

send-times: Maximum number of accounting-on packet retransmission attempts, 
ranging from 1 to 255.