3com MSR 20-20 참조 매뉴얼

Use the accounting-on enable send command to set the maximum number of 
accounting-on packet retransmission attempts.

Use the undo accounting-on enable send command to restore the default.

By default, the maximum number of accounting-on packet retransmission 
attempts is 5.

Note that:

■

This command is applicable to centralized devices only.

■

Execution of this command does not affect the results of other accounting-on 
related commands such as accounting-on enable. That is, execution of the 
undo accounting-on enable interval command will not disable the 
accounting-on function.

■

The maximum number of accounting-on packet retransmission attempts 
configured with this command takes effect immediately.

radius scheme, accounting-on enable.

# In RADIUS scheme rd, set the maximum number of accounting-on packet 
retransmission attempts to 10.

<Sysname> system-view

[Sysname] radius scheme rd

[Sysname-radius-rd] accounting-on enable send 10 

data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet 
{ giga-packet | kilo-packet | mega-packet | one-packet } }*

undo data-flow-format { data | packet }

RADIUS scheme view

data: Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or 
gigabyte.

packet: Specifies the unit for data packets, which can be one-packet, kilo-packet, 
mega-packet, or giga-packet.

Use the data-flow-format command to specify the unit for data flows or 
packets to be sent to a RADIUS server.

Use the undo data-flow-format command to restore the default.

By default, the unit for data flows is byte and that for data packets is 
one-packet.