3com MSR 20-20 참조 매뉴얼

portal server server-name ip ip-address [ key key-string | port port-id | url url-string ] 
*

undo portal server server-name [ key | port | url ]

System view

server-name: Name of the portal server, a case-sensitive string of 1 to 32 
characters.

ip-address: IP address of the portal server.

key-string: Shared key required for communication with the portal server, a 
case-sensitive string of 1 to 16 characters.

port-id: Destination port ID used when the device sends a message to the portal 
server on its own, in the range 1 to 65534. The default is 50100.

url-string: Uniform resource locator (URL) to which HTTP packets are to be 
redirected, in the http://ip-address format. The default of ip-address is the IP 
address of the portal server.

Use the portal server command to configure a portal server.

Use the undo portal server command to delete the specified portal server or 
restore the default.

By default, no portal server is configured.

Note that if the specified portal server exists but there is no user on the interface, 
the specified portal server will be deleted if no parameter is specified when the 
undo portal server command is executed. Otherwise, the port and url 
parameters, if specified, will be restored to the default values.

display portal server.

c

■

The parameters of a portal server are modifiable. If the portal feature is 
enabled on an interface, the portal server applied to the interface cannot be 
deleted. If there are users on this interface, the parameters of the portal 
server cannot be modified.

■

You must disable portal authentication on the interface before deleting the 
portal server applied to an interface in system view.

# Configure portal server pts, setting the IP address to 192.168.0.111, the key to 
portal, and the redirection URL to http://192.168.0.111/portal.