3com MSR 20-20 참조 매뉴얼
2165
Example
# Create IKE proposal 10 and enter IKE proposal view.
<Sysname> system-view
[Sysname] ike proposal 10
[Sysname-ike-proposal-10]
ike sa keepalive-timer interval
Syntax
ike sa keepalive-timer interval seconds
undo ike sa keepalive-timer interval
View
System view
Parameter
seconds: Transmission interval of ISAKMP SA keepalives in seconds, in the range
20 to 28,800.
20 to 28,800.
Description
Use the ike sa keepalive-timer interval command to set the ISAKMP SA
keepalive interval.
keepalive interval.
Use the undo ike sa keepalive-timer interval command to disable the
ISAKMP SA keepalive transmission function.
ISAKMP SA keepalive transmission function.
By default, no keepalive packet is sent.
Note that the keepalive interval configured at the local end must be shorter than
the keepalive timeout configured at the remote end.
the keepalive timeout configured at the remote end.
Related command:
Example
# Set the keepalive interval to 200 seconds.
<Sysname> system-view
[Sysname] ike sa keepalive-timer interval 200
ike sa keepalive-timer timeout
Syntax
ike sa keepalive-timer timeout seconds
undo ike sa keepalive-timer timeout
View
System view
Parameter
seconds: ISAKMP SA keepalive timeout in seconds, in the range 20 to 28,800.
Description
Use the ike sa keepalive-timer timeout command to asset the ISAKMP SA
keepalive timeout.
keepalive timeout.
Use the undo ike sa keepalive-timer timeout command to disable the
function.
function.