3com MSR 20-20 참조 매뉴얼

C

HAPTER

 149: NQA C

LIENT

 C

ONFIGURATION

 C

OMMANDS

interval: Interval between two consecutive tests, in milliseconds, in the range 0 to 
604800000. If the interval is 0, it indicates that only one test is performed.

Use the frequency command to configure the interval between two consecutive 
tests for a test group.

Use the undo frequency command to restore the default.

By default, the interval between two consecutive tests for a test group is 0 
milliseconds, that is, only one test is performed.

After you use the nqa schedule command to start an NQA test, one test is started 
at interval.

n

# Configure the interval between two consecutive tests as 1000 milliseconds.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] frequency 1000 

history-records number

Any NQA test type view

number: Maximum number of history records that can be saved in a test group, in 
the range 0 to 50.

Use the history-records command to configure the maximum number of history 
records that can be saved in a test group.

Use the undo history-records command to restore the default.

By default, the maximum number of records that can be saved in a test group is 
50.

If the number of history records exceeds the maximum number, the earliest history 
record for a probe will be discarded.

# Configure the maximum number of history records that can be saved in a test 
group as 10.

<Sysname> system-view

[Sysname] nqa entry admin test