3com MSR 20-20 참조 매뉴얼

C

HAPTER

 149: NQA C

LIENT

 C

ONFIGURATION

 C

OMMANDS

nqa entry admin-name operation-tag

undo nqa { all | entry admin-name operation-tag }

System view

admin-name: Specifies the name of the administrator who creates the NQA test 
operation, a string of 1 to 32 characters, with “-” excluded. It is case-insensitive.

operation-tag: Specifies the tag of a test operation, a string of 1 to 32 characters, 
with “-” excluded. It is case-insensitive.

all: All NQA test groups.

Use the nqa command to create an NQA test group and enter NQA test group 
view.

Use the undo nqa command to remove the test group.

Note that if the test type has been configured for the test group, you will directly 
enter NQA test type view when you execute the nqa command.

# Create an NQA test group whose administrator name is admin and whose 
operation tag is test and enter NQA test group view.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] 

System view

None

Use the nqa agent enable command to enable the NQA client.

Use the undo nqa agent enable command to disable the NQA client and stop 
all the tests being performed.

By default, the NQA client is enabled.

nqa server enable.