3com MSR 20-20 참조 매뉴얼

NetStream aggregation view

None

Use the enable command to enable current aggregation mode.

Use the undo enable command to disable current aggregation mode.

By default, no aggregation mode is enabled.

ip netstream aggregation.

# Enable NetStream AS aggregation.

<Sysname> system-view

[Sysname] ip netstream aggregation as

[Sysname-aggregation-as] enable 

ip netstream { inbound | outbound }

undo ip netstream { inbound | outbound }

Interface view

Table 604   Description on the fields of the display ip netstream export command

Version 5 export information 

Statistics for exported version 5 statistics 
packets 

Stream source interface 

Source interface of exported UDP packets 

Stream destination IP(UDP) 

Destination address and port number of 
exported UDP packets 

Exported stream number 

Number of exported streams 

Exported UDP datagram number(failed number) 

Number of exported UDP packets (number 
of failed sending attempts) 

Version 8 AS aggregation export information 

Statistics for exported version 8 AS 
aggregation UDP packets. Displayed only 
when NetStream aggregation is enabled. 

Version 8 tos-source-prefix export information 

Statistics for exported version 8 ToS-source 
prefix aggregation packets