3com MSR 20-20 참조 매뉴얼

# Enter NetStream AS aggregation view.

<Sysname> system-view

[Sysname] ip netstream aggregation as

[Sysname-aggregation-as] 

ip netstream export host ip-address udp-port

undo ip netstream export host [ ip-address ]

System view, NetStream aggregation view

ip-address: Destination IP address for NetStream UDP packets.

udp-port: Destination port number for NetStream UDP packets, in the range 0 to 
65535.

Use the ip netstream export host command to set the destination IP address 
and port number for NetStream UDP packets.

Use the undo ip netstream export host command to restore the default.

By default, no destination IP address and port number are configured in system 
view and the IP address and port number in aggregation view are those 
configured by users in system view.

Note that:

■

Different destination hosts can be configured in different aggregation views.

■

You can configure up to two different destination hosts in one aggregation 
view. Statistics packets for a single stream are sent to all destination hosts 
configured in system view. Aggregation statistics packets are sent to all 
destination hosts configured in the aggregation view corresponding to the 
aggregation type.

ip netstream aggregation, ip netstream export source.

# Configure the destination IP address and port number for NetStream statistics 
packet as 172.16.105.48 and 5000 respectively.

<Sysname> system-view

[Sysname] ip netstream export host 172.16.105.48 5000 

ip netstream export source interface interface-type interface-number