3com MSR 20-20 참조 매뉴얼

interface interface-type interface-number: Specifies the source interface by its 
type and number. The primary IP address configured on this interface is the source 
address of the transmitted packets. If no primary IP address is configured on the 
source interface, the connection fails.

ip source-ip-address: The source IP address of the current FTP client. This source 
address must be the one that has been configured on the device.

Use the ftp command to log onto the remote FTP server and enter FTP client view.

Note that:

■

This command applies to IPv4 network.

■

If you use this command without specifying any parameters, you will simply 
enter the FTP client view without logging onto the FTP server.

■

If you specify the parameter, you will be asked to enter the username and 
password for accessing the FTP server.

■

The priority of the source address specified with this command is higher than 
that with the ftp client source command. If you specify the source address 
with the ftp client source command first and then with the ftp command, the 
source address specified with the ftp command is used to communicate with 
the FTP server.

ftp client source.

# Log from the current device Sysname1 onto the device Sysname2 with the IP 
address of 192.168.0.211. The source IP address of the packets sent is 
192.168.0.212.

<Sysname1> ftp 192.168.0.211 source ip 192.168.0.212

Trying 192.168.0.211 ...

Press CTRL+K to abort

Connected to 192.168.0.211.

220 FTP Server ready

User(192.168.0.211:(none)):abc

331 Password required for abc

Password:

230 Login OK

[ftp] 

ftp client source { interface interface-type interface-number | ip source-ip-address }

System view

interface interface-type interface-number: Source interface for the FTP 
connection, including interface type and interface number. The primary IP address 
configured on the source interface is the source IP address of the packets sent by