3com MSR 20-20 참조 매뉴얼

C

HAPTER

 164: U

SER

 I

NTERFACE

 C

ONFIGURATION

 C

OMMANDS

<Sysname> system-view

[Sysname] user-interface vty 0

[Sysname-ui-vty0] undo acl 2001 outbound 

activation-key character

User interface view

character: Shortcut key for starting terminal sessions, a single character (or its 
corresponding ASCII code value in the range 0 to 127) or a string of 1 to 3 
characters.

Use the activation-key command to define a shortcut key for starting a terminal 
session.

Use the undo activation-key command to restore the default.

You can use a single character (or its corresponding ASCII code value in the range 
0 to 127) or a string of 1 to 3 characters to define a shortcut key. But in fact, only 
the first character functions as the shortcut key. For example, if you input an ASCII 
code value 97, the system will use its corresponding character a as the shortcut 
key; if you input the string b@c, the system will use the first letter b as the shortcut 
key.

By default, pressing the Enter key starts the terminal sessions. However, if you 
define a new shortcut key using the activation-key command, the Enter key no 
longer functions. You can use the display current-configuration command to 
display the shortcut key you have defined.

n

# Use letter s as the shortcut key for starting terminal sessions on the Console 
port.

<Sysname> system-view

[Sysname] user-interface console 0

[Sysname-ui-console0] activation-key s 

To verify the configuration, do the following:

# Exit the terminal session on the Console port.

[Sysname-ui-console0] return

<Sysname> quit

**************************************************************************

* All rights reserved (2004-2006)

*

* Without the owner’s prior written consent,

*

* No decompiling or reverse-switch fabricering shall be allowed.

*