3com MSR 20-20 참조 매뉴얼
2454
C
HAPTER
164: U
SER
I
NTERFACE
C
ONFIGURATION
C
OMMANDS
display history-command
Syntax
display history-command
View
Any view
Parameter
None
Description
Use the display history-command command to view the valid history
commands that have been executed recently.
commands that have been executed recently.
Currently, the system can display up to 256 history commands.
Related command:
Example
# Display history commands.
<Sysname> display history-command
system-view
quit
display current-configuration
display user-interface
Syntax
display user-interface [ num1 | { aux | console | tty | vty } num2 ] [ summary ]
View
Any view
Parameter
num1: Absolute number of a user interface. The value range varies by device, and
normally starts from 0.
normally starts from 0.
num2: Relative number of a user interface, in the following rules:
■
For the AUX port, the value is 0.
■
For the Console port, the value is 0.
■
For TTY user interfaces, the value range varies with devices, and normally starts
from 1.
from 1.
■
For VTY user interfaces, the value ranges from 0 to 4.
summary: Displays summary about user interfaces.
Description
Use the display user-interface command to view information about the
specified or all user interfaces.
specified or all user interfaces.
If the summary keyword is absent, the command displays the type of the user
interface, the absolute or relative number, the speed, the user privilege level, the
authentication mode and the physical location.
interface, the absolute or relative number, the speed, the user privilege level, the
authentication mode and the physical location.