3com MSR 20-20 참조 매뉴얼
166
P
O
E C
ONFIGURATION
C
OMMANDS
n
The support for the commands in this document varies with devices.
apply poe-profile
Syntax
apply poe-profile { index index | name profile-name }
undo apply poe-profile { index index | name profile-name }
View
PoE interface view
Parameter
index index: Specifies the index number of the PoE configuration file. The index
number ranges from 1 to 100.
number ranges from 1 to 100.
name profile-name: Specifies the name of the PoE configuration file. The file
name consists of 1 to 15 characters.
name consists of 1 to 15 characters.
Description
Use the apply poe-profile command to apply the PoE configuration file to the
current PoE interface.
current PoE interface.
Use the undo apply poe-profile command to remove the application of the
PoE configuration file to the current PoE interface.
PoE configuration file to the current PoE interface.
Note that the index number, instead of the name, of the PoE configuration file will
be displayed when you execute the display this command.
be displayed when you execute the display this command.
Related command:
display poe-profile and apply poe-profile interface.
Example
# Apply the PoE configuration file named A20 to the PoE interface Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] apply poe-profile name A20
[Sysname-Ethernet1/0] display this
#
interface Ethernet1/0
port link-mode route
apply poe-profile index 1
#